cfme.base.ui module

class cfme.base.ui.About(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of AboutView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Advanced(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.AuditLog(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Authentication(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.AutomateImportExport(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of AutomateImportExportView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.AutomateImportExportBaseView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.login.BaseLoggedInPage

flash

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

in_import_export
is_displayed
title

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.AutomateImportExportView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.AutomateImportExportBaseView

export_all

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

import_file

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

import_git

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
reset_all

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.AutomateSimulation(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of AutomateSimulationView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.AutomateSimulationView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.login.BaseLoggedInPage

avp

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

execute_methods

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

instance

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
message

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

request

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

result_tree

A class that implements the version picking functionality.

Basic usage is a descriptor in which you place instances of VersionPick in a view. Whenever is this instance accessed from an instance, it automatically picks the correct variant based on product_version defined in the widgetastic.browser.Browser.

You can also use this separately using the pick() method.

Example:

class MyView(View):
    something_version_dependent = VersionPick({
        '1.0.0': Foo('bar'),
        '2.5.0': Bar('baz'),
    })

This sample will resolve the correct (Foo or Bar) kind of item and returns it.

Parameters:version_dict – Dictionary of version_introduced: item
submit_button

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

target_object

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

target_type

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.CFMELog(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Chargeback(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ChargebackView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step(*args, **kwargs)[source]
class cfme.base.ui.Configuration(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ConfigurationView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ConfigurationView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.login.BaseLoggedInPage

accordions

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

flash

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

in_configuration
is_displayed
title

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.CustomLogos(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Dashboard(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of DashboardView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Details(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Diagnostics(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerDiagnosticsView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.DiagnosticsCollectLogs(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of DiagnosticsCollectLogsView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.DiagnosticsCollectLogsEdit(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of DiagnosticsCollectLogsEditView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.DiagnosticsCollectLogsEditSlave(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of DiagnosticsCollectLogsEditView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.DiagnosticsCollectLogsEditView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.DiagnosticsCollectLogsView

cancel

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

confirm_password

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

depot_name

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

depot_type

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
password

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

reset

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

save

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

uri

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

username

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

validate

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.DiagnosticsCollectLogsSlave(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of DiagnosticsCollectLogsView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.DiagnosticsCollectLogsView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ServerDiagnosticsView

collect

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

edit

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
last_log_collection

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

last_log_message

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

log_depot_uri

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

title

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.DiagnosticsDetails(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.DiagnosticsWorkers(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Documentation(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of DocView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Import(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ImportTags(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.LoggedIn(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of BaseLoggedInPage

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.LoginPage(parent, logger=None, **kwargs)[source]

Bases: widgetastic.widget.View

back

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

change_password

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

current_fullname
current_username
details

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

flash

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

hide_update_password()[source]
is_displayed
log_in(user, method='click_on_login')[source]
logged_in
logged_in_as_current_user
logged_in_as_user(user)[source]
logged_out
login

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

login_admin(**kwargs)[source]
new_password

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

password

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

show_update_password()[source]
submit_login(method='click_on_login')[source]
update_password(username, password, new_password, verify_password=None, method='click_on_login')[source]
username

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

verify_password

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.LoginScreen(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of LoginPage

prerequisite()[source]
step()[source]
class cfme.base.ui.MySettings(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.MySettingsView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.login.BaseLoggedInPage

is_displayed
tabs

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.ProductionLog(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RSS(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RSSView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDetails(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionView

prerequisite

This is a helper descriptor for destinations which are linked to an attribute of the object.

For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDiagnostics(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionDiagnosticsView

prerequisite

This is a helper descriptor for destinations which are linked to an attribute of the object.

For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDiagnosticsDatabase(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDiagnosticsOrphanedData(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDiagnosticsReplication(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDiagnosticsRolesByServers(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDiagnosticsServers(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDiagnosticsServersByRoles(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionDiagnosticsView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ConfigurationView

database

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
orphaneddata

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

replication

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

rolesbyservers

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

servers

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

serversbyroles

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

zones

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.RegionDiagnosticsZones(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of RegionDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.RegionView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ConfigurationView

canducollection

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

companycategories

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

companytags

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

details

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

imports

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

importtags

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
maptags

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

redhatupdates

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.RegionZones(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneListView

prerequisite

This is a helper descriptor for destinations which are linked to an attribute of the object.

For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ServerDetails(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ServerDiagnosticsView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ConfigurationView

auditlog

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

cfmelog

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

collectlogs

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

configuration

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
productionlog

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

summary

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

timelines

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

utilization

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

workers

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.ServerView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ConfigurationView

advanced

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

authentication

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

customlogos

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
server

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

workers

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.Tasks(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of TasksView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Timelines(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Utilization(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerDiagnosticsView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.Workers(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ServerView

am_i_here()[source]
prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneAdd(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneAddView

prerequisite

This is a helper descriptor for destinations which are linked to an attribute of the object.

For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneAddView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ZoneForm

add_button

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
class cfme.base.ui.ZoneCANDUGapCollection(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneDiagnosticsView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneDetails(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneDetailsView

prerequisite

This is a helper descriptor for destinations which are linked to an attribute of the object.

For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneDetailsView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ConfigurationView

configuration

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
class cfme.base.ui.ZoneDiagnostics(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneDiagnosticsView

prerequisite

This is a helper descriptor for destinations which are linked to an attribute of the object.

For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneDiagnosticsCollectLogs(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneDiagnosticsCollectLogsView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneDiagnosticsCollectLogsEdit(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of DiagnosticsCollectLogsEditView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneDiagnosticsCollectLogsView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.DiagnosticsCollectLogsView

edit

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
class cfme.base.ui.ZoneDiagnosticsRolesByServers(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneDiagnosticsView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneDiagnosticsServers(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneDiagnosticsView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneDiagnosticsServersByRoles(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneDiagnosticsView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneDiagnosticsView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ConfigurationView

candugapcollection

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

collectlogs

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
rolesbyservers

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

servers

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

serversbyroles

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.ZoneEdit(obj, navigate_obj)[source]

Bases: utils.appliance.implementations.ui.CFMENavigateStep

VIEW

alias of ZoneEditView

prerequisite

This is a helper descriptor for navigation destinations which are linked to the same class.

For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.

step()[source]
class cfme.base.ui.ZoneEditView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ZoneForm

is_displayed
save_button

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.ZoneForm(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ConfigurationView

cancel_button

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

description

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

max_scans

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

name

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

ntp_server_1

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

ntp_server_2

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

ntp_server_3

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

password

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

smartproxy_ip

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

username

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

verify

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

class cfme.base.ui.ZoneListView(parent, logger=None, **kwargs)[source]

Bases: cfme.base.ui.ConfigurationView

configuration

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

is_displayed
table

This class handles instantiating and caching of the widgets on view.

It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.

It also acts as a counter, so you can then order the widgets by their “creation” stamp.

cfme.base.ui.address(self)[source]
cfme.base.ui.automate_menu_name(appliance)[source]
cfme.base.ui.create(self, name=None, description=None, smartproxy_ip=None, ntp_servers=None, max_scans=None, user=None, cancel=False)[source]
cfme.base.ui.current_full_name(self)[source]

Returns the current username. Returns: the current username.

cfme.base.ui.delete(self, cancel=False)[source]

Delete the Zone represented by this object.

Parameters:cancel – Whether to click on the cancel button in the pop-up.
cfme.base.ui.exists(self)[source]
cfme.base.ui.logged_in(self)[source]
cfme.base.ui.login(self, user=None, submit_method='_js_auth_fn')[source]

Login to CFME with the given username and password. Optionally, submit_method can be press_enter_after_password to use the enter key to login, rather than clicking the button. :param user: The username to fill in the username field. :param password: The password to fill in the password field. :param submit_method: A function to call after the username and password have been input.

Raises:RuntimeError – If the login fails, ie. if a flash message appears
cfme.base.ui.login_admin(self, **kwargs)[source]

Convenience function to log into CFME using the admin credentials from the yamls. :param kwargs: A dict of keyword arguments to supply to the login() method.

cfme.base.ui.logout(self)[source]

Logs out of CFME.

cfme.base.ui.update(self, updates)[source]