cfme.configure.configuration.server_settings module¶
-
class
cfme.configure.configuration.server_settings.
Advanced
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
Amazon
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
AmazonAuthenticationView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
AmazonAuthenticationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.configure.configuration.server_settings.ServerAuthenticationView
Amazon Authentication View
-
access_key
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
get_groups
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
secret_key
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
validate
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.configure.configuration.server_settings.
Authentication
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
AuthenticationSetting
(appliance, auth_mode=None)[source]¶ Bases:
cfme.utils.appliance.NavigatableMixin
,cfme.utils.update.Updateable
,cfme.utils.pretty.Pretty
Represents Authentication Setting for CFME
Parameters: auth_mode – authorization mode, default value ‘Database’ -
auth_settings
¶ Authentication view fields values
-
pretty_attrs
= ['auth_mode']¶
-
set_auth_mode
(reset=False, **kwargs)[source]¶ Set up authentication mode
Parameters: reset – Set True, to reset all changes for the page. Default value: False - kwargs: A dict of keyword arguments used to initialize auth mode
- if you want not to use yamls settings, mode=’your_mode_type_here’ key/value should be a mandatory in your kwargs ex. auth_settings.set_auth_mode( reset= True, mode=’Amazon’, access_key=key, secret_key=secret_key)
-
set_session_timeout
(hours=None, minutes=None)[source]¶ Sets the session timeout of the appliance. :param hours: timeout hours value :type hours: str :param minutes: timeout minutes value :type minutes: str
ex. auth_settings.set_session_timeout(‘0’, ‘30’)
-
user_type_dict
= {'userprincipalname': 'User Principal Name', 'dn-uid': 'Distinguished Name (UID=<user>)'}¶
-
-
class
cfme.configure.configuration.server_settings.
CustomLogos
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
Database
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
DatabaseAuthenticationView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
DatabaseAuthenticationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.configure.configuration.server_settings.ServerAuthenticationView
Database Authentication View
-
is_displayed
¶
-
-
class
cfme.configure.configuration.server_settings.
DetailsAuth
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerAuthenticationView
-
prerequisite
¶ This is a helper descriptor for destinations which are linked to an attribute of the object.
For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
DetailsServer
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerInformationView
-
prerequisite
¶ This is a helper descriptor for destinations which are linked to an attribute of the object.
For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
External
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ExternalAuthenticationView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
ExternalAuthenticationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.configure.configuration.server_settings.ServerAuthenticationView
External Authentication View
-
enable_saml
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
enable_sso
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
get_groups
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
-
class
cfme.configure.configuration.server_settings.
Ldap
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
LdapAuthenticationView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
LdapAuthenticationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.configure.configuration.server_settings.ServerAuthenticationView
Ldap Authentication View
-
base_dn
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
bind_dn
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
bind_password
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
domain_prefix
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
follow_referrals
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
get_groups
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
get_roles
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
ldap_host_1
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
ldap_host_2
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
ldap_host_3
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
port
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
user_suffix
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
user_type
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
validate
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.configure.configuration.server_settings.
Ldaps
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
LdapsAuthenticationView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.configure.configuration.server_settings.
LdapsAuthenticationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.configure.configuration.server_settings.LdapAuthenticationView
Ldaps Authentication View
-
is_displayed
¶
-
-
class
cfme.configure.configuration.server_settings.
ServerAuthenticationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ServerView
Server Authentication View.
-
authentication_mode
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
hours_timeout
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
minutes_timeout
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
title
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.configure.configuration.server_settings.
ServerInformation
(appliance)[source]¶ Bases:
cfme.utils.update.Updateable
,cfme.utils.pretty.Pretty
,cfme.utils.appliance.NavigatableMixin
This class represents the Server tab in Server Settings
Different Forms take different values for their operations
Note: All lower parameters by default set to None
BasicInformationForm:
- company_name: [BasicInformationForm] Company name, default value in “My Company”
- appliance_name: [BasicInformationForm] Appliance name.
- appliance_zone: [BasicInformationForm] Appliance Zone.
- time_zone: [BasicInformationForm] Time Zone.
- locale: [BasicInformationForm] Locale used for users UI
ServerControlForm (Server Roles):
- websocket, ems_metrics_coordinator, cockpit_ws, smartproxy,
- storage_metrics_collector, database_operations, smartstate, event,
- storage_inventory, storage_metrics_processor, web_services, automate,
- rhn_mirror, database_synchronization, ems_operations, ems_metrics_collector,
- reporting, ems_metrics_processor, scheduler, git_owner, user_interface,
- embedded_ansible, storage_metrics_coordinator, ems_inventory,
- vmdb_storage_bridge, notifier: set True/False to change the state
VWwareConsoleSupportForm:
- console_type - Server console type
NTPServersForm:
- ntp_server_1, ntp_server_2, ntp_server_3 - Set ntp server
SMTPServerForm:
- host: SMTP Server host name
- port: SMTP Server port
- domain: E-mail domain
- start_tls: Whether use StartTLS
- ssl_verify: SSL Verification
- auth: Authentication type
- username: User name
- password: User password
- from_email: E-mail address to be used as the “From:”
- test_email: Destination of the test-email.
WebServicesForm:
- mode: web services mode
- security: security type
LoggingForm:
- log_level: log level type
CustomSupportURL:
- url: custom url
- decryption: url description
-
CONSOLE_TYPES
= ('VNC', 'VMware VMRC Plugin', 'VMware WebMKS')¶
-
SERVER_ROLES
= ('embedded_ansible', 'ems_metrics_coordinator', 'ems_operations', 'ems_metrics_collector', 'reporting', 'ems_metrics_processor', 'scheduler', 'smartproxy', 'database_operations', 'smartstate', 'event', 'user_interface', 'web_services', 'ems_inventory', 'notifier', 'automate', 'rhn_mirror', 'database_synchronization_role', 'git_owner', 'websocket', 'storage_metrics_processor', 'storage_metrics_collector', 'storage_metrics_coordinator', 'storage_inventory', 'vmdb_storage_bridge', 'cockpit_ws')¶
-
basic_information_values
¶ Returns(dict): basic_information fields values
-
custom_support_url_values
¶ Returns(dict): custom_support_url fields values
-
logging_values
¶ Returns(dict): logging fields values
-
ntp_servers_fields_keys
¶ Returns(list): ntp servers fields names
-
ntp_servers_values
¶ Returns(dict): ntp_servers fields values
-
pretty_attrs
= ['appliance']¶
-
send_test_email
(email=None)[source]¶ Send a testing e-mail on specified address. Needs configured SMTP.
-
server_roles_db
¶ Get server roles from Configure / Configuration from DB
Returns:
dict
ex.{‘cockpit’: True}
-
server_roles_ui
¶
-
smtp_server_values
¶ Returns(dict): smtp_server fields values
-
update_basic_information
(updates, reset=False)[source]¶ Navigate to a Server Tab. Updates basic information form
Parameters: - updates – dict, widgets will be updated regarding updates. ex. update_basic_information({‘company_name’: ‘New name’})
- updates. (regarding) –
- reset – By default(False) changes will not be reset, if True changes will be reset
-
update_custom_support_url
(updates, reset=False)[source]¶ Navigate to a Server Tab. Updates custom support url
Parameters: - updates – dict, widgets will be updated regarding updates.
- reset – By default(False) changes will not be reset, if True changes will be reset
-
update_logging_form
(updates, reset=False)[source]¶ Navigate to a Server Tab. Updates logging form
Parameters: - updates – dict, widgets will be updated regarding updates.
- reset – By default(False) changes will not be reset, if True changes will be reset
-
update_ntp_servers
(updates, reset=False)[source]¶ Navigate to a Server Tab. Updates ntp servers
Parameters: - updates – dict, widgets will be updated regarding updates.
- reset – By default(False) changes will not be reset, if True changes will be reset
-
update_server_roles_db
(roles)[source]¶ Set server roles on Configure / Configuration pages.
Parameters: roles – Roles specified as in server_roles dict in this module. Set to True or False
-
update_server_roles_ui
(updates, reset=False)[source]¶ Navigate to a Server Tab. Updates server roles via UI
Parameters: - updates – dict, widgets will be updated regarding updates.
- reset – By default(False) changes will not be reset, if True changes will be reset
-
update_smtp_server
(updates, reset=False)[source]¶ Navigate to a Server Tab. Updates smtp server
Parameters: - updates – dict, widgets will be updated regarding updates.
- reset – By default(False) changes will not be reset, if True changes will be reset
-
update_vmware_console
(updates, reset=False)[source]¶ Navigate to a Server Tab. Updates Vmware console
Parameters: - updates – dict, widgets will be updated regarding updates.
- reset – By default(False) changes will not be reset, if True changes will be reset
-
update_web_services
(updates, reset=False)[source]¶ Navigate to a Server Tab. Updates web services
Parameters: - updates – dict, widgets will be updated regarding updates.
- reset – By default(False) changes will not be reset, if True changes will be reset
-
vmware_console_values
¶ Returns(dict): vmware_console fields values
-
web_services_values
¶ Returns(dict): web_services fields values
-
class
cfme.configure.configuration.server_settings.
ServerInformationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ServerView
Class represents full Server tab view
-
basic_information
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
custom_support_url
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
logging_form
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
ntp_servers
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
server_roles
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
smtp_server
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
title
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
vmware_console
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
web_services
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.configure.configuration.server_settings.
Workers
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-