cfme.base.ui module¶
-
class
cfme.base.ui.
About
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
AboutView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Advanced
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
AuditLog
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Authentication
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
AutomateImportExport
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
AutomateImportExportView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
AutomateImportExportBaseView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.login.BaseLoggedInPage
-
flash
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
in_import_export
¶
-
is_displayed
¶
-
title
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
AutomateImportExportView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.AutomateImportExportBaseView
-
export_all
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
import_file
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
import_git
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
reset_all
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
AutomateSimulation
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
AutomateSimulationView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
AutomateSimulationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.login.BaseLoggedInPage
-
avp
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
execute_methods
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
instance
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
message
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
request
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
result_tree
¶ A class that implements the version picking functionality.
Basic usage is a descriptor in which you place instances of
VersionPick
in a view. Whenever is this instance accessed from an instance, it automatically picks the correct variant based on product_version defined in thewidgetastic.browser.Browser
.You can also use this separately using the
pick()
method.Example:
class MyView(View): something_version_dependent = VersionPick({ '1.0.0': Foo('bar'), '2.5.0': Bar('baz'), })
This sample will resolve the correct (Foo or Bar) kind of item and returns it.
Parameters: version_dict – Dictionary of version_introduced: item
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
target_object
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
target_type
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
CFMELog
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Chargeback
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ChargebackView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Configuration
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ConfigurationView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ConfigurationView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.login.BaseLoggedInPage
-
accordions
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
flash
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
in_configuration
¶
-
is_displayed
¶
-
title
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
CustomLogos
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Dashboard
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
DashboardView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Details
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Diagnostics
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
DiagnosticsCollectLogs
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
DiagnosticsCollectLogsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
DiagnosticsCollectLogsEdit
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
DiagnosticsCollectLogsEditView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
DiagnosticsCollectLogsEditSlave
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
DiagnosticsCollectLogsEditView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
DiagnosticsCollectLogsEditView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.DiagnosticsCollectLogsView
-
cancel
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
confirm_password
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
depot_name
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
depot_type
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
password
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
reset
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
save
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
uri
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
username
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
validate
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
DiagnosticsCollectLogsSlave
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
DiagnosticsCollectLogsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
DiagnosticsCollectLogsView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ServerDiagnosticsView
-
collect
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
edit
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
last_log_collection
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
last_log_message
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
log_depot_uri
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
title
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
DiagnosticsDetails
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
DiagnosticsWorkers
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Documentation
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
DocView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Import
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ImportTags
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
LoggedIn
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
BaseLoggedInPage
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
LoginPage
(parent, logger=None, **kwargs)[source]¶ Bases:
widgetastic.widget.View
-
back
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
change_password
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
current_fullname
¶
-
current_username
¶
-
details
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
flash
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
logged_in
¶
-
logged_in_as_current_user
¶
-
logged_out
¶
-
login
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
new_password
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
password
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
update_password
(username, password, new_password, verify_password=None, method='click_on_login')[source]¶
-
username
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
verify_password
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
LoginScreen
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
class
cfme.base.ui.
MySettings
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
MySettingsView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.login.BaseLoggedInPage
-
is_displayed
¶
-
tabs
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
ProductionLog
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RSS
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RSSView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDetails
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionView
-
prerequisite
¶ This is a helper descriptor for destinations which are linked to an attribute of the object.
For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDiagnostics
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for destinations which are linked to an attribute of the object.
For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDiagnosticsDatabase
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDiagnosticsOrphanedData
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDiagnosticsReplication
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDiagnosticsRolesByServers
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDiagnosticsServers
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDiagnosticsServersByRoles
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionDiagnosticsView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ConfigurationView
-
database
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
orphaneddata
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
replication
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
rolesbyservers
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
servers
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
serversbyroles
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
zones
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
RegionDiagnosticsZones
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
RegionDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
RegionView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ConfigurationView
-
canducollection
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
companycategories
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
details
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
imports
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
redhatupdates
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
replication
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
RegionZones
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneListView
-
prerequisite
¶ This is a helper descriptor for destinations which are linked to an attribute of the object.
For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ServerDetails
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ServerDiagnosticsView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ConfigurationView
-
auditlog
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
cfmelog
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
collectlogs
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
configuration
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
productionlog
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
summary
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
timelines
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
utilization
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
workers
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
ServerView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ConfigurationView
-
advanced
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
authentication
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
customlogos
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
server
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
workers
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
Tasks
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
TasksView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Timelines
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Utilization
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
Workers
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ServerView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneAdd
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneAddView
-
prerequisite
¶ This is a helper descriptor for destinations which are linked to an attribute of the object.
For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneAddView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ZoneForm
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
class
cfme.base.ui.
ZoneCANDUGapCollection
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneDetails
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneDetailsView
-
prerequisite
¶ This is a helper descriptor for destinations which are linked to an attribute of the object.
For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneDetailsView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ConfigurationView
-
configuration
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
-
class
cfme.base.ui.
ZoneDiagnostics
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for destinations which are linked to an attribute of the object.
For instance, imagine you have an object that has an attribute(parent) which has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToAttribute as a helper, supplying only the name of the attribute which stores the object to be used in the navigation, and the destination name. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneDiagnosticsCollectLogs
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneDiagnosticsCollectLogsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneDiagnosticsCollectLogsEdit
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
DiagnosticsCollectLogsEditView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneDiagnosticsCollectLogsView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.DiagnosticsCollectLogsView
-
edit
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
-
class
cfme.base.ui.
ZoneDiagnosticsRolesByServers
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneDiagnosticsServers
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneDiagnosticsServersByRoles
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneDiagnosticsView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneDiagnosticsView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ConfigurationView
-
candugapcollection
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
collectlogs
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
rolesbyservers
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
servers
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
serversbyroles
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
ZoneEdit
(obj, navigate_obj)[source]¶ Bases:
cfme.utils.appliance.implementations.ui.CFMENavigateStep
-
VIEW
¶ alias of
ZoneEditView
-
prerequisite
¶ This is a helper descriptor for navigation destinations which are linked to the same class.
For instance, imagine you have an object that has a ‘ViewAll’, destination that needs to be visited before you can click on ‘New’. In this instance, you would need to make the ‘New’ destination use ‘ViewAll’ as a prerequisite. As this would need no other special input, we can use NavigateToSibling as a helper. This will set prerequisite to be a callable that will navigate to the prerequisite step.
-
-
class
cfme.base.ui.
ZoneEditView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ZoneForm
-
is_displayed
¶
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
class
cfme.base.ui.
ZoneForm
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ConfigurationView
This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
description
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
max_scans
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
name
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
ntp_server_1
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
ntp_server_2
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
ntp_server_3
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
password
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
smartproxy_ip
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
username
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
verify
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
class
cfme.base.ui.
ZoneListView
(parent, logger=None, **kwargs)[source]¶ Bases:
cfme.base.ui.ConfigurationView
-
configuration
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
is_displayed
¶
-
table
¶ This class handles instantiating and caching of the widgets on view.
It stores the class and the parameters it should be instantiated with. Once it is accessed from the instance of the class where it was defined on, it passes the instance to the widget class followed by args and then kwargs.
It also acts as a counter, so you can then order the widgets by their “creation” stamp.
-
-
cfme.base.ui.
create
(self, name=None, description=None, smartproxy_ip=None, ntp_servers=None, max_scans=None, user=None, cancel=False)[source]¶
-
cfme.base.ui.
current_full_name
(self)[source]¶ Returns the current username. Returns: the current username.
-
cfme.base.ui.
delete
(self, cancel=False)[source]¶ Delete the Zone represented by this object.
Parameters: cancel – Whether to click on the cancel button in the pop-up.
-
cfme.base.ui.
login
(self, user=None, method='_js_auth_fn')[source]¶ Login to CFME with the given username and password. Optionally, submit_method can be press_enter_after_password to use the enter key to login, rather than clicking the button. :param user: The username to fill in the username field. :param password: The password to fill in the password field. :param submit_method: A function to call after the username and password have been input.
Raises: RuntimeError
– If the login fails, ie. if a flash message appears